Allwinner a33 10.1 tablet serial#

I had to disable the pwm_bl module, otherwise the screen will go black while boot.Д®cho blacklist pwm_bl>/etc/modprobe.d/pwm.conf

MODULES_NEXT='hci_uart gpio_sunxi rfcomm hidp bonding spi_sun7i 8021q a20_tp g_serial gslењ†80 gc0312 gc2145 rtl8150' MODULES='hci_uart gpio_sunxi rfcomm hidp bonding spi_sun7i 8021q a20_tp g_serial gslењ†80 gc0312 gc2145 rtl8150' #MODULES='hci_uart gpio_sunxi rfcomm hidp bonding spi_sun7i 8021q a20_tp' # depending of board and resolution use a defconfig file from sources/u-boot/v2018.05/configsД«OOTCONFIG='q8_a33_tablet_1024ењ†00_defconfig'

Hi Markbirss, I checked it again with current build and it's working with module 'g_serial' add to boards/nf By comparing the product pages the R16 seems to be a relabeled version of A33. This SoC gets used in the minicomputer presented in Next Thing Co.s C.H.I.P. Log1.txt Edited Decemby specific tablet you are using ? Are you able to boot a Armbian build image directly from sdcard now? The Allwinner R8 is repackaged version of the A13. I checked a lot of things, but I can't find a solution to solve this problem, the Kernel is booting this way, until it can't find the SD Card. Please check your kernel config and/or bootloader. done, booting the kernel.Д®rror: unrecognized/unsupported machine ID (r1 = 0x00001029).

Allwinner a33 10.1 tablet serial#

So I want to debug the Armbian Kernel with serial output and I used fastboot for it, I'm booting into fastboot with 'adb reboot bootloader' and then I'm sending the bootimage with fastboot ( first I created a image with mkimage with and without dtb file)ДЇastboot -c 'console=ttyS0,115200' boot uImage I was checking and this Image is booting the Tablet, with Kernel 4.1x. The Serial connection is only in the SD Adapter and I cant use it if I'm booting from it, or is there a possibility ? The SD Card is booting with a nice screen output but only to Kernel Boot, then the screen freezes. I created an new board, based on the nf with BOOTCONFIG='q8_a33_tablet_1024ењ†00_defconfig' and build a Debian Stretch Image with mainline Kernel 4.13 / 4.14. UPDATE: Today I build it again and now it's working, I think someone has change something.